304L Stainless Steel Sheet 4ftx8ft 304L Flat Sheet
4FTX8FT 304L stainless steel sheet
This is a 304L stainless steel sheet with a width of 4 feet and a
length of 8 feet. It is a standard export packaging size
cold-rolled stainless steel sheet
304L stainless steel belongs to the low-carbon type of 304
stainless steel and has good corrosion resistance.
The thickness of this sheet is relatively thin, making it light and
flexible.
Differences between 304L and 304
Different carbon content: The carbon content in 304L stainless
steel is lower than that in 304 stainless steel.
The carbon content of 304L is generally no more than 0.03%, while
the carbon content of 304 is usually below 0.08%.
During welding, 304L has a lower tendency to intergranular
corrosion due to its low carbon content, and has better welding
performance.
Corrosion resistance: 304L has slightly better corrosion resistance
than 304 in some corrosive environments, especially after welding
or high temperature use.
For example, in the chemical industry, when dealing with some
highly corrosive media, 304L stainless steel sheets may be
preferred.
Strength: The strength of 304 is usually slightly higher than that
of 304L.
However, in some occasions where strength requirements are not high
but corrosion resistance requirements are high, 304L will be more
suitable.
304L stainless steel sheet
304L stainless steel sheet is a high-quality stainless steel
material
Mainly containing about 18% to 20% chromium (Cr), about 8% to 12%
nickel (Ni), and low carbon content (usually not more than 0.03%),
the combination of these elements gives it good corrosion
resistance and oxidation resistance.
304L stainless steel sheet has good ductility and toughness, easy
to process and form, and its sheet form makes it show good
plasticity during bending, stamping and other processing.
304L stainless steel sheet has low carbon content, and the risk of
hot cracking and intergranular corrosion during welding is small,
and the performance of the joint after welding is stable.
304L stainless steel sheet has a smooth, bright and flat surface
with good appearance
Technical Parameters
| Product Name | 304 Stainless Steel Sheet |
| Thickness | 0.30~200mm |
| Width | 1219mm or as required |
| Length | 2440mm or as required |
| Standard | ASTM GB/T JIS4 ASME BS DIN EN |
| Material | 310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347,
347H, 304, 304L,302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S,
420, 430, 631, 904L, Duplex, etc. |
| Brand Name | EDEST,TISCO, BAO STEEL, ZPSS |
| Technique | Hot Rolled And Cold Rolled |
| Surface | 2B, 2D, BA, NO. 1, NO. 4, NO. 8, 8K, mirror,checkered,embossed,hair
line, sand blast, Brush, etching, etc |
| Price Term | Ex-Work, FOB, CNF, CFR, CIF, etc |
