AISI 304 cold rolled stainless steel sheet 0.3 mm thick
Specifications
The thickness is 0.3 mm, which is a relatively thin specification.
The width and length of this sheet can be customized according to
production needs and actual applications. Common widths are 1000
mm, 1219 mm, 1250 mm, 1500 mm, 1800 mm, 2000 mm, etc. There are
also many length options.
Production process
Produced by cold rolling process. During the cold rolling process,
the stainless steel slab is rolled at room temperature to make its
thickness thinner, the surface smoother and flatter, and the
dimensional accuracy higher. Compared with the hot rolling process,
the cold rolling process can make the steel plate have better
surface quality, higher dimensional accuracy and better mechanical
properties.
Performance characteristics:
Good surface quality: The cold rolling process makes the surface of
the thin plate smooth and neat, showing a high degree of finish and
good appearance. It is generally a 2B surface (matte surface). It
can also be processed into bright surface (BA), rolled matte
surface, brushed (HL), fine grinding (grinding 4K, 6K, 8K mirror
film) and other surface effects according to needs
Higher dimensional accuracy: The thickness tolerance control is
relatively strict. For example, the thickness tolerance can reach
+0 - 0.002 mm, and the width tolerance precision value can be +0 -
0.1 mm, which can meet the application scenarios with high
dimensional accuracy requirements
Good mechanical properties: It has certain strength and hardness,
while still maintaining good toughness and ductility
Corrosion resistance: Stainless steel itself has good corrosion
resistance, can resist corrosion from the atmosphere, water,
general chemicals, etc., and is suitable for applications under
various environmental conditions
Application areas:
Architectural decoration: It can be used for interior and exterior
decoration of buildings, such as wall decorative panels, ceilings,
curtain walls, etc. Its smooth surface and various surface
treatment effects can enhance the beauty of the building.
Furniture manufacturing: It is used to make panels, frames and
other parts of furniture, such as cabinets, wardrobes, tables,
etc., with the advantages of beauty, durability and easy cleaning.
Electronic equipment: It is used as precision structural parts in
electronic information products, such as the shell, internal
components or appearance parts of computers, cameras, mobile power
supplies, smart wearable devices, etc.; due to its good
electromagnetic wave shielding, it can also be used in
mid-to-high-end smartphones and other communication equipment.
Automotive industry: It is often used as a material for interior
and exterior decoration of automobiles, such as automobile
moldings, wheel covers, exhaust systems, fuel tanks, engine
fasteners, oil coolers, water tanks, heat insulation covers and
other automotive accessories.
Kitchen utensils: It can be used to manufacture range hood shells,
gas stove panels, water storage tanks, cabinet products, stainless
steel kitchenware, etc. Its good heat resistance, corrosion
resistance and easy cleaning properties make it very suitable for
kitchen environments.
Chemical equipment: used to manufacture towers, tanks, container
linings, internal components, heat exchangers, pipe fittings and
other chemical equipment. In petrochemicals, high requirements are
placed on its heat resistance and corrosion resistance, especially
intergranular corrosion resistance.
Technical Parameters
| Product Name | 304L Stainless Steel Sheet/Plate |
| Thickness | 0.30~150mm |
| Width | 1000mm,1219mm,1500mm,1800mm,2000mm,etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Standard | ASTM GB/T JIS4 ASME BS DIN EN |
| Material | 310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347,
347H, 304, 304L,302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S,
420, 430, 631, 904L, Duplex, etc. |
| Brand Name | EDEST,TISCO, BAO STEEL, ZPSS |
| Technique | Hot Rolled And Cold Rolled |
| Surface | 2B, 2D, BA, NO. 1, NO. 4, NO. 8, 8K, mirror,checkered,embossed,hair
line, sand blast, Brush, etching, etc |
| Price Term | Ex-Work, FOB, CNF, CFR, CIF, etc |
Stainless steel composition content
stainless steel composition content |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
304 | ≤0.08 | ≤2 | ≤0.75 | ≤0.045 | ≤0.03 | 18-20 |
| 8-10.5 | ≤0.1 |
304L | ≤0.03 | ≤2 | ≤1 | ≤0.045 | ≤0.03 | 18-20 |
| 9-11 |
|
304H | 0.04-0.1 | ≤2 | ≤0.75 | ≤0.045 | ≤0.03 | 18-20 |
| 8-10.5 |
|
316 | ≤0.08 | ≤2.00 | ≤1.00 | ≤0.035 | ≤0.03 | 16.0-18.5 | 2.0-3.0 | 10.0-14.0 |
|
321 | ≤0.08 | ≤2.00 | ≤0.75 | ≤0.75 | ≤0.03 | 7.00-19.0 |
| 9.00-12.00 |
|
