Factory supply 0.6- 1.5 mm thickness 430 hairline stainless steel sheet

Product name: 430 stainless steel sheet/plate
Grade: 400 series
Standards: AISI, ASTM, DIN, GB, JIS, EN
Surface: 2B, BA, 8K, HL, NO1, NO4, etc.
Type: sheet, coil, steel strip
Length: The whole roll is opened flat, according to your requirements
Width: 500mm-1550mm or as required
Thickness: 0.6mm-1.5mm or required thickness
Tolerance: thickness ±0.02MM
Size: required size
Quality: Premium grade, economical model
Origin: China (Mainland)
Brand: EDEST STEEL Taigang Baosteel
Application areas: construction, home appliances, decoration, elevator decoration
Certification: BV IBR ISO ROHS SGS
Process: cold rolling
Transportation: wooden pallets or wooden boxes suitable for sea transportation,
Shipping size: 20' or 40' container or as per customer requirements

Features:

Chemical composition:
Carbon (C) content ≤0.12%, silicon (Si) content ≤0.75%, manganese (Mn) content ≤1.00%, phosphorus (P) content ≤0.040%, sulfur (S) content ≤0.030%, nickel (Ni) content ≤0.60% (can be included), chromium (Cr) content is 16.00 - 18.00%.
Physical properties:
Density is 7.75g/cm³, melting point is between 1425 - 1510°C, thermal expansion coefficient is 10.4x10^-6/K, elastic modulus is 200GPa, thermal conductivity is 23.9W/m・K, resistivity is 0.60x10^-6Ω・m.
Corrosion resistance:
It has good corrosion resistance and good tolerance to general atmosphere, water and many chemical media.
However, its corrosion resistance is poor in strong acid and alkali environments, and its overall corrosion resistance is slightly weaker than other stainless steel alloys such as 304.
If used in coastal areas and other environments, it may be more prone to rust.
Oxidation resistance:

It can remain stable at high temperatures and is not prone to oxidation reactions. It is suitable for some high-temperature application environments, such as parts that work at high temperatures.
Magnetism: 430 stainless steel is a ferromagnetic material with certain magnetism, which makes it attractive in some specific applications, such as parts that require magnetic adsorption.
Mechanical properties:
It has good strength and toughness and is suitable for general industrial applications.
However, compared with some other stainless steel alloys, its mechanical properties may be slightly inferior.
After heat treatment, the tensile strength can reach 1379MPa.
Processing performance:
It has good formability and ductility, which is conducive to processing into products of various shapes, such as thin plates, strips, etc.
However, its toughness during cold processing is not as good as 304 stainless steel, but its working hardening degree is different from 304.
During hot working, the material should be evenly heated to 816 - 1038°C before forging and other operations. It is necessary to avoid long-term exposure to the forming temperature to cause grain growth, so as to avoid the appearance of "orange peel" texture on the surface of the material.

Surface treatment:

No.1: Silvery white, dull, hot-rolled to a specified thickness, then annealed and descaled to form a rough, dull surface, suitable for uses that do not require surface gloss.
No.2D: Silvery white, heat-treated and pickled after cold rolling, sometimes a matte surface processed by a final light rolling on a rough roller, used for general materials and deep drawing materials that do not require strict surface requirements.
No.2B: The gloss is stronger than No.2D. After No.2D treatment, it is subjected to a final light cold rolling on a polishing roller to obtain a proper gloss. It is the most commonly used surface processing method and can be used for building materials, kitchen utensils, etc.
BA: Bright as a mirror, usually a bright annealed surface processing, with high surface reflectivity, commonly used in building materials and kitchen utensils.
No.3: Coarse grinding, grinding No.2D and No.2B materials with 100-200# (unit) abrasive grinding belt, suitable for building materials and kitchen utensils.
No.4: Intermediate grinding, grinding No.2D and No.2B materials with 150-180# abrasive grinding belt to obtain a polished surface. This is a general-purpose, mirror-reflective, bright surface with visible "grains".
No.240: Fine grinding, grinding No.2D and No.2B materials with 240# abrasive grinding belt, can be used for kitchen utensils.
No.320: Ultra-fine grinding, grinding No.2D and No.2B materials with 320# abrasive grinding belt.
No.400: The gloss is close to BA, grinding No.2B materials with 400# polishing wheel, can be used as general materials, construction materials, and kitchen utensils.
HL: Hairline grinding, using abrasive materials of appropriate particle size for hairline grinding (150-240#), it has a lot of abrasive grains and is often used for buildings and construction materials.
No.7: Close to mirror polishing, polished with 600# rotary polishing wheel, can be used for art and decoration.
No.8: Mirror polishing, polished with mirror polishing wheel, used for reflectors and decoration.
In actual application, it is necessary to comprehensively consider and select the appropriate surface treatment method based on the specific use environment, requirements and budget to meet different needs.

Application areas:

Due to its characteristics and price advantages, 430 stainless steel sheets are widely used in the field of architectural decoration, such as curtain walls, railings, doors and windows, etc. It is also used to make home appliance parts, such as washing machine inner drums, microwave oven shells, etc. It can also be used to make some automotive interior parts. It is also used in some chemical equipment that does not require particularly high corrosion resistance. Because it is safe and non-toxic and has a certain degree of corrosion resistance, it can also be used in food and tableware, etc.

Stainless Steel Plate Standard Stock Sizes:

Technical Parameters

EDEST STEEL CO., LTD is a large comprehensive steel enterprise in China specializing in the export of stainless steel and carbon steel.With over 26 years of experience in production, processing and sales.We maintain ample stock of stainless steel, carbon steel and other steel materials.Currently,we have established six major production bases nationwide,to provide diversified processing and production of stainless steel, carbon steel and other metal materials to meet your various procurement needs.Our high-quality products are well-suited for industries such as energy, manufacturing, machinery, and healthcare,Construction,Infrastructure,Household Goods and so on.

We are a leading one-stop high-end manufacturing service enterprise in China, equipped with capabilities in steel material processing, component fabrication, finished product manufacturing and professional technical services. We aim to provide comprehensive support to global end-user manufacturing enterprises.

We strive to be your most satisfactory supplier in China. Let us start with your orders, and we will establish a good strategic partnership with you by offering the best service, highest quality products, and reasonable prices.